Adverse Effects Of Idling Of Magnetic Pump

kategori

produk baru

pam frod plastik fluorin diri sendiri
plastik frod fluorin sendiri pam pam, menurut piawaian antarabangsa, bahagian-bahagian limpahan adalah plastik fluorin, bahagian-bahagian beban galas diperbuat daripada bahan logam, boleh dilengkapi dengan meterai luaran tunggal luaran, meterai mesin perakitan luaran dan air siram, boleh disesuaikan.
baca lebih lanjut
ih keluli tahan karat satu peringkat air laut air garam pam empar
ih keluli tahan karat tunggal pentas air garam air emparan boleh dibuat 304,316.316l dan keluli tahan karat double fasa keluli tahan karat. ia adalah pam pemindahan yang sangat baik dan pam pemunggahan untuk mengangkut pelbagai kepekatan air laut, air garam dan pelarut organik.
baca lebih lanjut

berita terkini

ihf-d teflon dipasangkan pam emparan sambungan langsung

Pam emparan berbuih fluorin ihf-d adalah produk yang lebih baik daripada pam empar yang dipenuhi dengan fluorin. apa yang lebih tahan asid daripada pa

Adverse effects of idling of magnetic pump

2021/10/12

The damage and cost of magnetic pump to air will be great. The idling of the magnetic pump causes damage to a number of components, a pump body, internal magnetic steel, external magnetic steel, static ring, impeller, isolation sleeve, pump shaft, thrust ring, sealing ring and so on. In the process of using the magnetic pump, idle speed is the cause of many failures, so the user must understand why the magnetic pump cannot be idled. Next, the editor of Tenglong briefly explains why the magnetic pump cannot be idled as follows:

1, the magnetic pump can not be idling, because the magnetic pump of the magnetic cylinder is composed of cooling medium, if the air will cause the magnetic cylinder lock.

2, magnetic pump rotor bearings are mostly made of cemented carbide, lubricated by the medium, the pump can not be lubricated.

3. After the pump is empty, there is no material cooling pump, so it is possible to burn the diaphragm directly.

4. The core components of the magnetic pump are external magnetic components and internal magnetic components. If idling, the core components will be degaussed at high temperatures and the performance of the magnetic pump will greatly reduce post-demagnetization.

sebelumnya :
Correct start-up sequence of stainless steel centrifugal pump
seterusnya :
Guide for selection of sulfuric acid pumps