High Temperature Resistant Centrifugal Pump Installer
produk baru
  • pam fuzz sendiri-priming
    pam frod plastik fluorin diri sendiri

    plastik frod fluorin sendiri pam pam, menurut piawaian antarabangsa, bahagian-bahagian limpahan adalah plastik fluorin, bahagian-bahagian beban galas diperbuat daripada bahan logam, boleh dilengkapi dengan meterai luaran tunggal luaran, meterai mesin perakitan luaran dan air siram, boleh disesuaikan.

    baca lebih lanjut
  • pam empar keluli tahan karat
    ih keluli tahan karat satu peringkat air laut air garam pam empar

    ih keluli tahan karat tunggal pentas air garam air emparan boleh dibuat 304,316.316l dan keluli tahan karat double fasa keluli tahan karat. ia adalah pam pemindahan yang sangat baik dan pam pemunggahan untuk mengangkut pelbagai kepekatan air laut, air garam dan pelarut organik.

    baca lebih lanjut
berita terkini
ihf-d teflon dipasangkan pam emparan sambungan langsung

ihf-d teflon dipasangkan pam emparan sambungan langsung

Pam emparan berbuih fluorin ihf-d adalah produk yang lebih baik daripada pam empar yang dipenuhi dengan fluorin. apa yang lebih tahan asid daripada pa

ZX stainless steel self-priming horizontal acid-resistant and alkali-resistant centrifugal pump.

2020/05/09

Application of stainless steel self-priming centrifugal pump.
ZX self-priming pump is a horizontal self-priming centrifugal pump suitable for urban environmental protection, construction, fire fighting, chemical industry, pharmaceutical, electric power, electroplating, petroleum, mining, equipment cooling, oil tanker unloading and so on.
Characteristics of stainless steel self-priming centrifugal pump:

ZX self-priming centrifugal pump has the advantages of compact structure, convenient operation, smooth operation, easy maintenance, high efficiency and long service life.


Failure causes of stainless steel self-priming centrifugal pump:
1. ZX self-priming pump does not produce water.
The main results are as follows: 1. There is no liquid storage or insufficient liquid storage in the pump cover.
2. Air leakage in the suction pipe.
3. The rotational speed is too low.
4. The suction distance is too high or the suction line is too long.
5. The leakage of mechanical seal is too large.
6. The gas in the suction line cannot be discharged from the outlet.

2. ZX self-priming pump has a large noise and vibration.
1. The soles of the feet are unstable.
2. Bending of pump shaft.
3. Cavitation phenomenon.
4. Serious bearing wear.
5. There are sundries in the inlet pipeline.
6. The spindle of pump is different from that of electric motor.

Third, the method of self-suction and discharge of stainless steel:
1. Add enough liquid to store liquid.
2. Check and eliminate the phenomenon of air leakage.
3. Adjust the report.
4. Reduce the suction distance or shorten the suction line.
5. Repair or swap.
6. Make it excluded.
7. Reinforcement.
8. Replace or correct.
9. Adjust the working conditions.
10. Replace.
11. Get rid of sundries.
12. Adjust coaxiality


   

pasukan profesional untuk berkhidmat !